HighCompleted
Schedule cleaning of the pelletizer and classifier as well as sharpening of the cutters at the next available planned downtime. Ensure cleaning and sharpening are completed before significant quality losses occur.
Due 2026-05-21Created May 20, 2026, 2:54 AMUpdated May 23, 2026, 1:40 AMTwin Screw Extruder 1 - MEGA 25
Complete Task
Record the actual work performed before closing the task.
This task is already completed. Add future audit notes by opening the related task occurrence.
Edit Task
Human review can correct the machine, priority, status, due date, action, and notes.
Original Request
One-time issue that generated this corrective task.
The pelletizer and classifier need to be cleaned, and the cutters require sharpening.
Production stopped: NoSafety concern: NoQuality affected: YesSubmitted May 20, 2026, 2:54 AM
- Issue Type
- Scheduled cleaning and sharpening maintenance
- Production
- Production is not stopped, but ongoing quality could be impacted if cleaning and sharpening are not performed.
- Safety
- No direct safety risks reported.
- Quality
- Quality is affected, likely resulting in lower product consistency, suboptimal pellet sizing, and potential increased scrap or rework.
Completion Log
Human completion record for this one-time task.
Completed May 23, 2026, 1:40 AMNext due 2026-05-27
Schedule cleaning of the pelletizer and classifier as well as sharpening of the cutters at the next available planned downtime. Ensure cleaning and sharpening are completed before significant quality losses occur.
Record technician assigned, inspection result, root cause, parts replaced, downtime, and final operating condition. Record affected batch/lot, quality checks performed, and disposition of suspect material. Manager review recommended before marking complete.
Machine Maintenance History
Other maintenance tasks on this machine for context around this one-time issue.
MediumRule-based
Vacuum and venting system: Inspect vacuum venting line, seals, and filter condit
Inspect vacuum venting line, seals, and filter condition Schedule: every 250 hours.
Notes: Starter rule for twin screw extruders
CompletedDue not setCreated Jun 3, 2026, 1:28 AM
MediumRule-based
Vacuum and venting system: Inspect vacuum venting line, seals, and filter condit
Inspect vacuum venting line, seals, and filter condition Schedule: every 250 hours.
Notes: Starter rule for twin screw extruders
CompletedDue 2026-05-27Created May 23, 2026, 1:50 AM
HighRule-based
Gearbox: Check gearbox oil level and condition
Starter rule for twin screw extruders
OpenDue not setCreated May 23, 2026, 1:48 AM
HighRule-based
Gearbox - Check gearbox oil level and condition
Check gearbox oil level and condition
Notes: Auto-created from runtime-based maintenance rule during demo test
CompletedDue 2026-05-20Created May 17, 2026, 5:53 AM
MediumRule-based
Vacuum and venting system - Inspect vacuum venting line, seals, and filter condition
Auto-created from runtime-based maintenance rule during demo test
CompletedDue 2026-05-20Created May 17, 2026, 5:53 AM